Products
Product
Silibest 50 Covering Inoculant | New Alloy
Description
Silibest 50 is a covering inoculant listed in our New Alloy range. The existing catalogue describes its covering and inoculating application in ductile iron treatment.
It is a separate product from Ishikawa slag-removal materials. Specify the Silibest grade, particle size and treatment method when enquiring.
It is a separate product from Ishikawa slag-removal materials. Specify the Silibest grade, particle size and treatment method when enquiring.
Feature
In terms of cost, quality, and Mg recovery rate, as a covering agent and inoculant for ductile iron, 50% Fe-Si particles (SIilibest 50 inoculant) containing 50% Si and low Al content (SIilibest 50 inoculant) are the best and most suitable! !
Effect
◎ High specific gravity and proper dissolution speed. (Better than 75% Fe-Si)
◎ The recovery rate of Mg will improve. (There is Mg vapor and Si with strong affinity)
◎ Stable response. (The most stable of various covering agents)
◎ The Si% is appropriate, even if more points are added, the increase of Si can be controlled within a certain range.
◎ It has the necessary volume as a covering agent. (There is no certain volume in the steel shavings)
◎ The temperature drop is less than the use of steel shavings and ductile shavings.
◎ The cost is particularly low.
◎ Very low Al content.
◎ The recovery rate of Mg will improve. (There is Mg vapor and Si with strong affinity)
◎ Stable response. (The most stable of various covering agents)
◎ The Si% is appropriate, even if more points are added, the increase of Si can be controlled within a certain range.
◎ It has the necessary volume as a covering agent. (There is no certain volume in the steel shavings)
◎ The temperature drop is less than the use of steel shavings and ductile shavings.
◎ The cost is particularly low.
◎ Very low Al content.
Chemical
Silibest 50: Si 47%, Al 0.7%. Confirm other grades separately.
Size
0~3mm
3~10mm
3~10mm
Pack
20 kg / small bag. Confirm bulk packaging, pallets and delivery configuration when enquiring; the existing language versions differ on bulk packaging.
Use
FCD applicable
Other
1. After adding Mg alloy to the cavity of the treatment basin, appropriately add Silibest 50 inoculant to cover it (0.6~1.5%).
2. Mix the Mg alloy with the appropriate amount of Silibest 50 inoculant (0.6~1.5%) before adding it to the cavity of the treatment basin.
2. Mix the Mg alloy with the appropriate amount of Silibest 50 inoculant (0.6~1.5%) before adding it to the cavity of the treatment basin.
Frequently asked questions
Is Silibest 50 an Ishikawa covering product?
No. It is listed in the New Alloy range; its specifications must not be used for an Ishikawa product.
Related products and technical notes
Need material advice or a quotation?
Tell us the product, application and quantity so we can help confirm specifications and availability.
Contact us Call us (06) 2014336