Products
Product
Coating Paste 6105LG#
Description
It is a dark gray paint, suitable for aluminum, magnesium, copper, zinc and other alloys. It is made by mixing inert metal refractory, a little graphite and a special high-temperature adhesive to prevent the adhesion of molten metal. A protective film is formed on the surface of the metal tool and in the metal crucible. The materials used in the coating are all high-purity special products. When in contact with molten metal, no impurities will be generated, and the molten metal will not be contaminated.
Feature
When melting aluminum, magnesium, copper, zinc and other alloys, iron tools in contact with molten metal are often susceptible to corrosion by molten metal, resulting in a small amount of iron melting in the molten metal. When melting aluminum, it will seriously affect the strength and toughness of the alloy. In the case of copper and zinc alloys, the infiltration of iron will cause slag inclusion at hard spots to affect processing difficulties. Therefore, during the melting process, all iron tools in contact with molten metal, such as milling iron crucibles, and metal thermocouple protection Rods, ladles, scoops, covers, slag cakes, etc., must be coated with SK 6105LG to isolate the contact between iron and molten metal. SK6105 LG has high refractoriness and strong adhesion.
Effect
1. It has strong adhesion and is easy to use.
2. Conducive to cleaning tools and milling iron crucibles.
3. Extend the life of iron tools and milling crucibles.
4. Reduce the risk of contamination of molten metal.
2. Conducive to cleaning tools and milling iron crucibles.
3. Extend the life of iron tools and milling crucibles.
4. Reduce the risk of contamination of molten metal.
Pack
25KG/barrel
Other
1. Clean the tool first, and then use a brush to apply SK6105LG to the surface of the tool, and then slowly put the tool in the aluminum broth and soak it for about ten seconds and pick it up immediately.
2. The coating agent can also be placed near the furnace to transfer heat. After the coating agent is brushed on the surface of the tool, the tool is slowly and completely immersed in the aluminum broth, and the tool can be used after taking it out for about ten seconds.
3. There is no need to stop the machine during the production operation, and the coating agent can be applied to the small area where the tool falls off without affecting the work.
2. The coating agent can also be placed near the furnace to transfer heat. After the coating agent is brushed on the surface of the tool, the tool is slowly and completely immersed in the aluminum broth, and the tool can be used after taking it out for about ten seconds.
3. There is no need to stop the machine during the production operation, and the coating agent can be applied to the small area where the tool falls off without affecting the work.