Products
Product
Ishikawa slag remover No. 4 (for cast iron)
Description
Ishikawa silica is an accumulation rock with SiO2 (silica) as the main component. It is mainly composed of pumice tuff and is a natural raw material.
Since Ishikawa silica has countless interlinked pores in the sand, its main characteristics are large surface area ratio, stable chemical properties, and light specific gravity. It is used as a slag remover material for cast iron.
When used, the operation is simple, the amount of use is small, the work efficiency is high, the slag removal effect is superior, and it is a product that has attracted attention.
Our factory has the latest equipment and management system. All manufacturing processes such as mining, water washing, high temperature drying, screening, inspection, packaging, etc. are produced in the latest equipment factory, which can ensure stable product quality and provide high-precision and high-quality products.
Since Ishikawa silica has countless interlinked pores in the sand, its main characteristics are large surface area ratio, stable chemical properties, and light specific gravity. It is used as a slag remover material for cast iron.
When used, the operation is simple, the amount of use is small, the work efficiency is high, the slag removal effect is superior, and it is a product that has attracted attention.
Our factory has the latest equipment and management system. All manufacturing processes such as mining, water washing, high temperature drying, screening, inspection, packaging, etc. are produced in the latest equipment factory, which can ensure stable product quality and provide high-precision and high-quality products.
Feature
Compared with other slag removal products in Japan, the usage is 30% less. Compared with European and mainland slag removal products, the usage is 60% less.
When using on-site, please be sure to communicate with the on-site user to reduce the amount of use.
(The above usage reduction message is a feedback message from many foundries in Taiwan after using it.)
For every kilogram of consumption reduction, one kilogram of waste recycling costs can be reduced
Respond to environmental protection 5R and reduce waste generation.
When using on-site, please be sure to communicate with the on-site user to reduce the amount of use.
(The above usage reduction message is a feedback message from many foundries in Taiwan after using it.)
For every kilogram of consumption reduction, one kilogram of waste recycling costs can be reduced
Respond to environmental protection 5R and reduce waste generation.
Effect
Light weight
Good slag accumulation
Short work time
Low usage
Less slag removal
Does not stick to the furnace wall
Minimize hot metal adhesion
Production cost reduction
Good slag accumulation
Short work time
Low usage
Less slag removal
Does not stick to the furnace wall
Minimize hot metal adhesion
Production cost reduction
Chemical
(SiO2) 74.00%
(Al2O3) 12.60%
(K2O) 0.99%
(NA2O) 0.83%
(Fe2O3) 0.16%
(CaO) 4.50%
(TiO2) 3.30%
(MgO) 0.06%
(Ig.Loss) 3.40%
Rock types Sedimentary rocks (mainly tuff).
(Al2O3) 12.60%
(K2O) 0.99%
(NA2O) 0.83%
(Fe2O3) 0.16%
(CaO) 4.50%
(TiO2) 3.30%
(MgO) 0.06%
(Ig.Loss) 3.40%
Rock types Sedimentary rocks (mainly tuff).
Size
No.4
Particle size below 1.0mm
Particle size below 1.0mm
Pack
20KG/paper bag