Products
Product
Coverage Inoculant #50 (0-3mm)
Description
For ductile iron
Feature
In terms of cost, quality, and Mg recovery rate, as a covering agent and inoculant for ductile iron, 50% Fe-Si particles (SIilibest 50 inoculant) containing 50% Si and low Al content (SIilibest 50 inoculant) are the best and most suitable! !
Effect
◎ High specific gravity and proper dissolution speed. (Better than 75% Fe-Si)
◎ The recovery rate of Mg will improve. (There is Mg vapor and Si with strong affinity)
◎ Stable response. (The most stable of various covering agents)
◎ The Si% is appropriate, even if more points are added, the increase of Si can be controlled within a certain range.
◎ It has the necessary volume as a covering agent. (There is no certain volume in the steel shavings)
◎ The temperature drop is less than the use of steel shavings and ductile shavings.
◎ The cost is particularly low.
◎ Very low Al content.
◎ The recovery rate of Mg will improve. (There is Mg vapor and Si with strong affinity)
◎ Stable response. (The most stable of various covering agents)
◎ The Si% is appropriate, even if more points are added, the increase of Si can be controlled within a certain range.
◎ It has the necessary volume as a covering agent. (There is no certain volume in the steel shavings)
◎ The temperature drop is less than the use of steel shavings and ductile shavings.
◎ The cost is particularly low.
◎ Very low Al content.
Chemical
Ｓｉ: 47%
Ａｌ: 0.7%
Ａｌ: 0.7%
Size
0～3mm
3～10mm
3～10mm
Pack
20kg/bag
500kg/bag
1 ton/bag
500kg/bag
1 ton/bag
Use
FCD applicable
Other
1. After adding Mg alloy to the cavity of the treatment basin, appropriately add Silibest 50 inoculant to cover it (0.6~1.5%).
2. Mix the Mg alloy with the appropriate amount of Silibest 50 inoculant (0.6~1.5%) before adding it to the cavity of the treatment basin.
2. Mix the Mg alloy with the appropriate amount of Silibest 50 inoculant (0.6~1.5%) before adding it to the cavity of the treatment basin.