Products
Product
Super Carbon silicon inoculant New-Black 50
Description
For gray cast iron.
Inoculant containing secondary calcined graphite.
Inoculant containing secondary calcined graphite.
Feature
It is a product developed for the main purposes of small parts of gray cast iron and thin parts to prevent whitening and improve machinability.
The effect of preventing white mouth is extremely high, and the effect of improving the machinability is significant, improving the homogenization and miniaturization of the structure, and also improving the graphite structure.
The effect of preventing white mouth is extremely high, and the effect of improving the machinability is significant, improving the homogenization and miniaturization of the structure, and also improving the graphite structure.
Effect
◎The effect of preventing white mouth is very good, and it is most suitable for small parts, thin parts and auto parts castings.
◎Improve the machinability of the product, and the effect is remarkable.
◎The dosage is about half of Fe-Si-based inoculant and it is effective.
◎Contains special active elements, so the inoculation effect can last for a long time.
◎Can prevent shrinkage.
◎Improve the machinability of the product, and the effect is remarkable.
◎The dosage is about half of Fe-Si-based inoculant and it is effective.
◎Contains special active elements, so the inoculation effect can last for a long time.
◎Can prevent shrinkage.
Chemical
G: 50%
Si: 35%
Alkaline soil: Ca+Ba≒2.0
Al: 1%
Fe: other
Si: 35%
Alkaline soil: Ca+Ba≒2.0
Al: 1%
Fe: other
Size
0～1.5㎜ 以下
Pack
20kg/bag
500kg/bag
1 ton/bag
500kg/bag
1 ton/bag
Use
FC Applicable
FCD applicable
FCD applicable
Other
◎Start adding when the output is 15-20%.
◎The output from the furnace is more than 50%, and the effect is very good with continuous addition.
◎When adding super carbon silicon, try to get involved in the flowing molten iron as much as possible, the effect will be more significant.
◎The standard addition rate is 0.1 to 0.2% of the amount of molten iron.
◎The output from the furnace is more than 50%, and the effect is very good with continuous addition.
◎When adding super carbon silicon, try to get involved in the flowing molten iron as much as possible, the effect will be more significant.
◎The standard addition rate is 0.1 to 0.2% of the amount of molten iron.